FD503 material applications
Energy & grid
DBSilco supplies FD503 for supply and control compartments in solar, storage and grid equipment. Fill volume, heat transfer and operating conditions guide material selection.
Potting applications
Potting applications
Compare FD503 grades
Solar microinverters
Local potting can surround a microinverter’s windings, with a heat path to the housing in its under-panel position.
TG20 · TG30 · TG101

PV rapid-shutdown electronics
PV rapid-shutdown units can use FD503 around switching and control circuits.
TG101 · TG60E · TG30

BESS battery management
Battery-monitoring systems can use FD503 in their separate board compartment.
TG60S · TG101 · TG60E

Energy-storage converters
Energy-storage converters can use FD503 around auxiliary supplies and magnetics.
TG30 · TG20 · TG60E

Smart electricity meters
Local potting can fill a smart meter’s supply compartment while calibration contacts, terminals and antenna space stay clear.
TG60E · TG101

Grid protection relays
Local potting is an option for a protection relay’s small supply and interface boards. Plug-in cards and trip connections stay accessible.
TG60E · TG101

Wind-turbine power controls
FD503 is an option for potting small wind-turbine control supplies. The mounting position sets the weight, vibration and service constraints.
TG60E · TG101 · TG20

Home energy management
FD503 is an option for potting a home energy controller’s supply circuits. Terminals, network sockets and rail-release access stay clear.
TG60E · TG101

Renewable energy
Local potting can surround selected solar and storage circuits, with a heat path to the housing.
TG101 · TG20 · TG30

Battery systems
Battery-control boards can be potted inside a separate electronics compartment, with cell vents and service connections left clear.
TG60S · TG101