Skip to content

FD503 material applications

Smart electricity meters

Local potting can fill a smart meter’s supply compartment while calibration contacts, terminals and antenna space stay clear.

Rectangular smart electricity meter with a covered terminal chamber and cable conduits
Illustrative image: potential FD503 application.

Material supply

FD503 grades

Full grade comparison

FD503-TG60E

TG60E’s low viscosity helps fill small gaps around the auxiliary transformer.

Thermal conductivity
≥0.6 W/m·K
Mixed viscosity
1,500-2,500 cps
Working time
30-50 min

FD503-TG101

TG101 is an option for a separate board section where modest heat transfer and even coverage are the main needs.

Thermal conductivity
≥0.9 W/m·K
Mixed viscosity
2,500 ± 1,000 cps
Working time
At least 30 min

Potential potting locations

Auxiliary supply
This small converter powers measurement and communication circuits away from the field-wiring terminals.
Measurement board
Voltage dividers and current-sensor circuits produce the readings. Clean surfaces, insulation spacing and calibration access remain important after filling.
Communication supply
A regulator supports radio or wired transmissions. Antennas and removable module connections stay clear of the fill.

Application testing

Compatibility, cure and assembly performance need testing with the production materials and process.

Measurement range
Before-and-after accuracy tests should cover low and rated currents, representative power factors and the specified ambient temperatures.
Communication and supply
Repeated transmission tests should check signal strength and supply stability at the meter’s warmest planned operating condition.
Insulation after exposure
Environmental cycling needs to be followed by insulation and leakage checks, plus inspection for voids, strained joints and material in service openings.
More in energy

Buy from DBSilco

Get a quote for your FD503 order.

Email the grade, quantity and delivery destination. We’ll confirm pricing, A/B pack sizes and delivery terms.

Grade not selected? Include your application and required properties.

Sales email

sales@dbsilco.com