Skip to content

FD503 material applications

Grid protection relays

Local potting is an option for a protection relay’s small supply and interface boards. Plug-in cards and trip connections stay accessible.

Digital feeder protection relay mounted in a switchgear control-panel door
Illustrative image: potential FD503 application.

Material supply

FD503 grades

Full grade comparison

FD503-TG60E

TG60E’s low viscosity helps it flow beneath isolation transformers in a compact processor supply.

Thermal conductivity
≥0.6 W/m·K
Mixed viscosity
1,500-2,500 cps
Working time
30-50 min

FD503-TG101

TG101 is an option for an input or output-driver board with a useful heat path to the enclosure.

Thermal conductivity
≥0.9 W/m·K
Mixed viscosity
2,500 ± 1,000 cps
Working time
At least 30 min

Potential potting locations

Processor supply
A DC/DC converter on the removable card powers the processor, memory and measurement circuits in the required start-up order.
Analog input board
This board processes current and voltage signals. Sensor plugs and parts that affect calibration need separate consideration.
Output drivers
Electronic drivers operate the trip outputs. Mechanical relay contacts and moving parts remain outside the material.

Application testing

Compatibility, cure and assembly performance need testing with the production materials and process.

Readings and trip timing
Test signals across the operating temperature range should produce readings and output timing consistent with the original relay.
Supply interruptions
Start-up, power interruption and recovery tests should use the specified card supply and include repeated output operation.
Insulation and service
After environmental cycling, insulation checks and joint inspection should accompany a card-removal trial with clean connectors.
More in energy

Buy from DBSilco

Get a quote for your FD503 order.

Email the grade, quantity and delivery destination. We’ll confirm pricing, A/B pack sizes and delivery terms.

Grade not selected? Include your application and required properties.

Sales email

sales@dbsilco.com