Skip to content

Double Carbon FD503 · Supplied by DBSilco

FD503-TG20

Medium-viscosity, two-part potting compound for inductors and power modules.

1:1 A:B by weight 10 or 25 kg per component

Properties below use the Shore 00 sheet. Compare the two TG20 data sheets before your trial.

Illustrative gray silicone material in a mixing cup beside a cured sample
Illustrative image: grey potting material. Not a grade-specific product photograph.
Thermal conductivity · Shore 00
2.0 ± 0.1 W/m·K
Mixed viscosity
3,000-5,000 cps
Working time
At least 40 min
Hardness
Shore 00 55-65

Double Carbon · FD503-TG20

Material properties

Shore 00 TDS

Source: FD503-TG20-TDS.pdf

Shore 00 sheet values; compare the Shore A sheet below.

Before cure

Material type
Two-component addition-cure potting compound
Appearance
Component A: grey fluid; Component B: white fluid
Viscosity
3,000-5,000 cps per component
Mixed viscosity
3,000-5,000 cps
Mixing ratio
1:1 by weight
Working time
At least 40 min

After cure

Hardness
Shore 00 55-65
Thermal conductivity
2.0 ± 0.1 W/m·K (ASTM D5470)
Dielectric strength
At least 8 kV/mm
Volume resistivity
At least 1.0 × 10¹² Ω·cm
Density
2.6 ± 0.1 g/cm³

Cure schedule

Curing time
No more than 3 h; cure temperature not specified
Curing time at 80°C
No more than 30 h as printed; verification required

The Shore 00 sheet prints ≤30 against 80°C curing time in hours. The unit and value are unclear; confirm the schedule with DBSilco. A separate ≤3 h entry has no stated temperature. The description calls for heat, while the processing instructions also permit room-temperature cure.

Contact DBSilco to confirm the temperature and schedule for your selected grade before evaluation.

Two TG20 data sheets

The two sheets list different values. Use each sheet as a complete set, and tell us which one your project uses when you request samples or pricing.

Six differences between the TG20 Shore 00 and Shore A technical data sheets
PropertyShore 00 sheet · this pageShore A sheet
Working timeAt least 40 min≥30 min
HardnessShore 00 55-65Shore A 20-30
Thermal conductivity2.0 ± 0.1 W/m·K (ASTM D5470)2.0 ± 0.2 W/(m·K)
Dielectric strengthAt least 8 kV/mm≥13 kV/mm
Volume resistivityAt least 1.0 × 10¹² Ω·cm≥1.0 × 10¹³ Ω·cm
Density2.6 ± 0.1 g/cm³2.73 ± 0.1 g/cm³

Sources: FD503-TG20-TDS.pdf and FD503-TG20-Shore-A-TDS.pdf. Shore A and Shore 00 are different hardness scales.

Illustrative gray silicone potting around a copper toroidal winding in a round housing
Illustrative image: silicone potting application.

Applications

Inductors and power modules

FD503-TG20 is a medium-viscosity potting silicone for inductors and power modules; its Shore 00 data sheet lists 2.0 ± 0.1 W/m·K.

Processing steps from the TDS

Technical data sheet
  1. Prepare components

    Each component needs thorough stirring before weighing. Separate tools keep A and B from mixing in their storage containers.

  2. Mix & degas

    Mix A and B at 1:1 by weight until uniform. The mixture then needs 1-3 minutes under vacuum to remove trapped air.

  3. Dispense

    The mixture has at least 40 minutes of working time. Pour promptly before it thickens.

Material compatibility

The data sheet lists PC, PP, ABS and PVC plastics, as well as metals. The stated operating temperature range is -40°C to 200°C.

Materials that affect curing

Partly cured condensation-cure silicones, amine-cured epoxies and wax or rosin left on solder joints can stop TG20 curing properly.

Test conditions

The uncured values come from room-temperature tests on the day the material was produced. The mechanical and electrical figures apply to samples that have fully cured.

Technical data sheet
Storage and compliance

Shelf life: 12 months in sealed drums, stored dry at 0–35°C.

The TDS states RoHS and REACH compliance. Contact DBSilco before ordering to confirm which current reports are available for this grade.

Data notes & compliance

Packaging and storage

FD503-TG20 is supplied as separate A and B components.

Component A
10 or 25 kg drums
Component B
10 or 25 kg drums
Mixing ratio
1:1 A:B by weight
Shelf life
12 months, sealed and dry at 0–35°C

Example: 10 kg A + 10 kg B provides 20 kg of mixed material. Confirm the pack size and quantity in your quotation.

Packaging and ordering details

Data sheets

  • FD503-TG20 Shore 00 Technical Data Sheet

    English · PDF · Shore 00 hardness scale

  • FD503-TG20 Shore A Technical Data Sheet

    English · PDF · Shore A hardness scale

Compare all five

Buy from DBSilco

Get a quote for your FD503 order.

Email the grade, quantity and delivery destination. We’ll confirm pricing, A/B pack sizes and delivery terms.

Grade not selected? Include your application and required properties.

Sales email

sales@dbsilco.com