Skip to content

FD503 material applications

Power magnetics

FD503-TG20 and TG30 can fill spaces around inductor and transformer windings.

Potting compound dispensed around copper-wound inductors
Illustrative image: potential FD503 application.

Material supply

FD503 grades

Full grade comparison

FD503-TG20

TG20 is a medium-viscosity option for winding fills. Shore 00 and Shore A have different hardness and other properties.

Thermal conductivity · Shore 00
2.0 ± 0.1 W/m·K
Mixed viscosity
3,000-5,000 cps
Working time
At least 40 min

FD503-TG30

TG30 suits windings where heat is the main concern and the passages allow its higher-viscosity material to fill completely.

Thermal conductivity
≥3.0 W/m·K
Mixed viscosity
8,000-15,000 cps
Working time
At least 30 min

FD503-TG101

TG101 is an option for compact magnetic parts where reaching tight passages matters more than maximum conductivity.

Thermal conductivity
≥0.9 W/m·K
Mixed viscosity
2,500 ± 1,000 cps
Working time
At least 30 min

TG20 has separate Shore 00 and Shore A data sheets with different values. Confirm the version with DBSilco before ordering.

Potential potting locations

Power inductors
Toroidal and bobbin-wound inductors generate heat in their copper turns and magnetic cores.
Converter transformers
Bobbin spaces, lead exits and winding insulation determine how material can enter an isolated transformer assembly.
Filter chokes
Common-mode and differential-mode chokes need to retain their specified impedance after filling.

Application testing

Compatibility, cure and assembly performance need testing with the production materials and process.

Winding temperature
Temperature measurements need the specified load and frequency, poorest cooling condition and heat from nearby components.
Magnetic response
Inductance, winding resistance and relevant impedance or loss measurements should be compared before filling, after cure and after environmental tests.
Internal fill quality
Sectioned samples should reveal gaps around deep spaces and wire exits. Any voids need assessment for their effect on insulation and heat transfer.
More in automation

Buy from DBSilco

Get a quote for your FD503 order.

Email the grade, quantity and delivery destination. We’ll confirm pricing, A/B pack sizes and delivery terms.

Grade not selected? Include your application and required properties.

Sales email

sales@dbsilco.com