Skip to content

FD503 material applications

EV charging

Local potting can fill selected charger-module compartments while keeping a heat path to the housing and access for module replacement.

Electric vehicle charging station with a connected charging cable
Illustrative image: potential FD503 application.

Material supply

FD503 grades

Full grade comparison

FD503-TG60E

TG60E’s low viscosity helps fill narrow passages in an auxiliary supply.

Thermal conductivity
≥0.6 W/m·K
Mixed viscosity
1,500-2,500 cps
Working time
30-50 min

FD503-TG20

TG20 is an option around power stages and magnetics with a heat path to the housing. Shore 00 and Shore A have different specifications.

Thermal conductivity · Shore 00
2.0 ± 0.1 W/m·K
Mixed viscosity
3,000-5,000 cps
Working time
At least 40 min

FD503-TG30

TG30 has thermal conductivity of at least 3.0 W/m·K. Its 8,000–15,000 cps mixed viscosity requires enough filling clearance in the charger compartment.

Thermal conductivity
≥3.0 W/m·K
Mixed viscosity
8,000-15,000 cps
Working time
At least 30 min

TG20 has separate Shore 00 and Shore A data sheets with different values. Confirm the version with DBSilco before ordering.

Potential potting locations

DC charger power modules
Power stages and magnetics need a measured heat path to the cooled baseplate or metal enclosure.
Auxiliary power supplies
These compact supplies power the display, communication board and charger controls.
Enclosed control boards
Selected control-board compartments can be filled while connectors, service points and sensors remain clear.

Application testing

Compatibility, cure and assembly performance need testing with the production materials and process.

Electrical isolation
The complete module needs its specified insulation tests, including checks for voids and changes after moisture exposure.
Repeated charging cycles
Load and ambient-temperature cycles should reveal component temperatures and any separation between the fill and housing.
Enclosure protection
The finished housing, seals and cable entries need tests for the installation conditions. Potting material data does not establish an enclosure ingress rating.
More in mobility

Buy from DBSilco

Get a quote for your FD503 order.

Email the grade, quantity and delivery destination. We’ll confirm pricing, A/B pack sizes and delivery terms.

Grade not selected? Include your application and required properties.

Sales email

sales@dbsilco.com