Skip to content

Double Carbon FD503 · Supplied by DBSilco

FD503-TG60E

Low-viscosity, two-part silicone for potting power modules.

1:1 A:B by weight 10 or 20 kg per component

Illustrative gray silicone material in a mixing cup beside a cured sample
Illustrative image: grey potting material. Not a grade-specific product photograph.
Thermal conductivity
≥0.6 W/m·K
Mixed viscosity
1,500-2,500 cps
Room-temperature working time
30-50 min
Hardness
Shore A 40-50

Double Carbon · FD503-TG60E

Material properties

Open TDS

Before cure

Material type
Two-component addition-cure silicone
Appearance
Component A: grey fluid; Component B: white fluid
Viscosity
1,500-2,500 cps per component
Mixed viscosity
1,500-2,500 cps
Mixing ratio
1:1 by weight
Room-temperature working time
30-50 min

After cure

Hardness
Shore A 40-50
Thermal conductivity
At least 0.6 W/m·K (ASTM D5470)
Dielectric strength
At least 18 kV/mm
Dielectric constant
2.4-3.0 at 1 MHz
Volume resistivity
At least 1.0 × 10¹³ Ω·cm
Density
1.56 ± 0.02 g/cm³

Cure schedule

Room-temperature curing time
3-5 h at ambient reference T; T is not numerically defined

The cure table lists 1–3 h at T+5°C, 3–5 h at T and 5–9 h at T−5°C, but does not define T. The description permits room-temperature or heated cure; the processing instructions specify heat.

Contact DBSilco to confirm the temperature and schedule for your selected grade before evaluation.

Potted power module with heat-sink fins
Illustrative image: silicone potting application.

Applications

Potting for power modules

FD503-TG60E has a mixed viscosity of 1,500–2,500 cps and 30–50 minutes of working time for power-module potting.

Processing steps from the TDS

Technical data sheet
  1. Prepare components

    Each component needs thorough stirring in its own container. Separate tools keep A and B from mixing before weighing.

  2. Mix & degas

    Mix equal weights of A and B (1:1) until uniform. Vacuum treatment for 1-3 minutes then removes trapped air.

  3. Dispense

    The mixture has 30-50 minutes of working time at room temperature. Pour before it thickens.

Material compatibility

The data sheet lists PC, PP, ABS and PVC plastics, as well as metals. The stated operating temperature range is -40°C to 200°C.

Materials that affect curing

Partly cured condensation-cure silicones, amine-cured epoxies and wax or rosin left on solder joints can prevent the silicone from curing properly.

The mixing instructions specify 1:1 A:B by weight. The table also mentions volume, but no volume ratio is confirmed.

Test conditions

The uncured values come from room-temperature tests on the day the material was produced. The mechanical and electrical figures apply to fully cured samples.

Technical data sheet
Storage and compliance

Shelf life: 12 months in sealed drums, stored dry at 0–35°C.

The TDS states RoHS compliance. Contact DBSilco before ordering to confirm which current reports are available for this grade.

Data notes & compliance

Packaging and storage

FD503-TG60E is supplied as separate A and B components.

Component A
10 or 20 kg drums
Component B
10 or 20 kg drums
Mixing ratio
1:1 A:B by weight
Shelf life
12 months, sealed and dry at 0–35°C

Example: 10 kg A + 10 kg B provides 20 kg of mixed material. Confirm the pack size and quantity in your quotation.

Packaging and ordering details

Data sheet

Compare all five

Buy from DBSilco

Get a quote for your FD503 order.

Email the grade, quantity and delivery destination. We’ll confirm pricing, A/B pack sizes and delivery terms.

Grade not selected? Include your application and required properties.

Sales email

sales@dbsilco.com