Skip to content

FD503 material applications

Sensors & instrumentation

Local potting can cover an instrument’s supply and interface electronics while sensing surfaces and calibration points stay clear.

Mixing nozzle dispensing material into a sensor housing
Illustrative image: potential FD503 application.

Material supply

FD503 grades

Full grade comparison

FD503-TG101

TG101 suits heat-producing interface circuits in a compartment separate from the exposed sensing element.

Thermal conductivity
≥0.9 W/m·K
Mixed viscosity
2,500 ± 1,000 cps
Working time
At least 30 min

FD503-TG60S

TG60S is a low-viscosity option for the instrument’s separate power module, with a cured hardness of Shore A 25–35. Check compatibility with nearby components in a trial assembly.

Flame-retardant rating
V-0 (UL 94), as listed in the TDS
Mixed viscosity
600-1,200 cps
Working time
30-60 min

TG60S lists V-0 (UL 94) in its TDS. Thermal conductivity, specimen thickness and a test report are not provided. A material rating does not establish the finished assembly’s rating.

Potential potting locations

Industrial sensor interfaces
Proximity, current and temperature sensors can have separate signal-processing and power sections for a trial.
Measurement transmitters
Pressure and process instruments keep their electronics behind an exposed sensing interface that must remain clear.
Remote acquisition units
These enclosed monitoring boards connect to external probes through cable glands or sealed connectors.

Application testing

Compatibility, cure and assembly performance need testing with the production materials and process.

Calibration drift
Zero and full-scale readings, plus response measurements, should remain within the instrument’s specified accuracy limits after cure and temperature cycling.
Sensitive surfaces
Heated operation and storage tests should be followed by checks for deposits or material movement onto optical surfaces and delicate sensing parts.
Enclosure performance
Moisture and cable-entry tests must use the complete instrument. Temperature cycling should be followed by inspection of contact between the fill and housing.
More in automation

Buy from DBSilco

Get a quote for your FD503 order.

Email the grade, quantity and delivery destination. We’ll confirm pricing, A/B pack sizes and delivery terms.

Grade not selected? Include your application and required properties.

Sales email

sales@dbsilco.com