Skip to content

FD503 material applications

PV rapid-shutdown electronics

PV rapid-shutdown units can use FD503 around switching and control circuits.

Module-level solar disconnect housing clipped to a panel frame with four cable leads
Illustrative image: potential FD503 application.

Material supply

FD503 grades

Full grade comparison

FD503-TG101

TG101 is an option around the switches and controller when the compartment offers a useful path to the housing.

Thermal conductivity
≥0.9 W/m·K
Mixed viscosity
2,500 ± 1,000 cps
Working time
At least 30 min

FD503-TG60E

TG60E’s low viscosity helps it flow beneath the small control supply’s magnetics. The TDS leaves cure temperature T undefined; contact DBSilco to confirm the schedule before production.

Thermal conductivity
≥0.6 W/m·K
Mixed viscosity
1,500-2,500 cps
Working time
30-50 min

FD503-TG30

TG30 has thermal conductivity of at least 3.0 W/m·K for hotter switches. Its higher-viscosity mix needs enough clearance beside the current-carrying connections.

Thermal conductivity
≥3.0 W/m·K
Mixed viscosity
8,000-15,000 cps
Working time
At least 30 min

Potential potting locations

Disconnect switches
Power switches and their connections carry panel current inside the small frame-mounted housing.
Command receiver
The receiver and controller detect the keep-on or shutdown signal. Circuits that couple that signal need separate checks after filling.
Control supply
A small converter powers the receiver and switch drivers across the specified panel-voltage range.

Application testing

Compatibility, cure and assembly performance need testing with the production materials and process.

Shutdown and restart
After temperature cycling, tests should measure reception and output changes when the keep-on signal is lost and restored.
Loaded temperatures
The highest supported panel current and ambient temperature should guide temperature measurements at switches and connections.
Electrical checks
Environmental tests should be followed by insulation and function checks, plus inspection for voids or material entering connectors. FD503 data does not establish rapid-shutdown certification, installation compliance or disconnection time.
More in energy

Buy from DBSilco

Get a quote for your FD503 order.

Email the grade, quantity and delivery destination. We’ll confirm pricing, A/B pack sizes and delivery terms.

Grade not selected? Include your application and required properties.

Sales email

sales@dbsilco.com