Skip to content

FD503 material applications

Security-camera electronics

Local potting can fill a security camera’s dry supply compartment while lenses, adjustment mechanisms and service connections stay clear.

Wall-mounted bullet network camera with a closed cable junction box and sealed connecting cable
Illustrative image: potential FD503 application.

Material supply

FD503 grades

Full grade comparison

FD503-TG60E

TG60E’s lower mixed viscosity lets it flow around closely placed components in a small auxiliary supply.

Thermal conductivity
≥0.6 W/m·K
Mixed viscosity
1,500-2,500 cps
Working time
30-50 min

FD503-TG101

TG101 is an option for a supply compartment with a heat path to the housing. The fill remains separate from the imaging module.

Thermal conductivity
≥0.9 W/m·K
Mixed viscosity
2,500 ± 1,000 cps
Working time
At least 30 min

FD503-TG30

TG30 is limited to a hot, accessible magnetic component, not general camera-chip cooling. The compartment needs room for its higher-viscosity fill, and the camera mount must accommodate the added mass.

Thermal conductivity
≥3.0 W/m·K
Mixed viscosity
8,000-15,000 cps
Working time
At least 30 min

Potential potting locations

PoE converter
An isolated supply and its magnetics sit in a dry compartment. Ethernet contacts and insulation gaps stay clear of fill.
Auxiliary supply circuits
These converters power lighting or controls. Local potting stays separate from optical windows and motorized focus parts.
External interface modules
A separate power or interface module sits beside the camera. Cable glands and connectors retain their specified seals.

Application testing

Compatibility, cure and assembly performance need testing with the production materials and process.

Power and communication
Supply voltages, streaming and network operation need tests with the specified cables and power source, including startup and changes to night operation.
Images and adjustment
Temperature cycling should include image-quality, focus and lighting checks. Cured material must not shift alignment or restrict moving lens parts.
Housing and maintenance
Exposure tests must use the finished camera’s seals and cable entries. A trial inspection or module replacement should be followed by enclosure-fit and electrical checks.
More in buildings

Buy from DBSilco

Get a quote for your FD503 order.

Email the grade, quantity and delivery destination. We’ll confirm pricing, A/B pack sizes and delivery terms.

Grade not selected? Include your application and required properties.

Sales email

sales@dbsilco.com