Skip to content

FD503 material applications

Building access controls

Door controllers can use FD503 around supply circuits while field terminals stay accessible.

Wall-mounted building access terminal beside a glass office entrance door.
Illustrative image: potential FD503 application.

Material supply

FD503 grades

Full grade comparison

FD503-TG60E

TG60E’s low viscosity helps flow through small component gaps.

Thermal conductivity
≥0.6 W/m·K
Mixed viscosity
1,500-2,500 cps
Working time
30-50 min

FD503-TG101

TG101 suits the lock supply, where heating follows the connected load and the fill can reach the controller housing.

Thermal conductivity
≥0.9 W/m·K
Mixed viscosity
2,500 ± 1,000 cps
Working time
At least 30 min

Potential potting locations

Controller input converter
This circuit converts PoE or DC input inside the controller. Ethernet contacts and removable field terminals remain accessible.
Lock-output supply
Regulators and support components supply the lock. Relay contacts, output jumpers and external protection wiring stay outside the fill.
Reader-side auxiliary supply
A small converter powers the entry terminal. The credential antenna, camera window, speaker and tamper switch remain clear.

Application testing

Compatibility, cure and assembly performance need testing with the production materials and process.

Loaded door operation
Converter temperatures and regulated outputs need checks with the specified locks, reader load, wiring length and repeated access cycles.
Changes in power supply
The installed system needs primary-loss, backup, restart and door-release tests with its specified settings.
Connections after exposure
Environmental tests should be followed by credential, network and tamper checks, plus a demonstration of field-terminal and controller replacement.
More in buildings

Buy from DBSilco

Get a quote for your FD503 order.

Email the grade, quantity and delivery destination. We’ll confirm pricing, A/B pack sizes and delivery terms.

Grade not selected? Include your application and required properties.

Sales email

sales@dbsilco.com