Skip to content

FD503 material applications

Outdoor LED display power

Outdoor LED displays can use FD503 in their rear power-supply compartment.

Perforated power supply and connected LED tiles inside the rear service cabinet of an outdoor display
Illustrative image: potential FD503 application.

Material supply

FD503 grades

Full grade comparison

FD503-TG60E

TG60E’s lower mixed viscosity helps it flow around leads in a small auxiliary supply. Detachable tile harnesses must remain clear.

Thermal conductivity
≥0.6 W/m·K
Mixed viscosity
1,500-2,500 cps
Working time
30-50 min

FD503-TG101

TG101 is an option for a moderately loaded supply with contact to a metal carrier. Display brightness and content affect the heat load.

Thermal conductivity
≥0.9 W/m·K
Mixed viscosity
2,500 ± 1,000 cps
Working time
At least 30 min

FD503-TG30

TG30 is an option for accessible hot magnetics when the measured heat path justifies higher conductivity. Filling around winding leads must not block ventilation or service connections.

Thermal conductivity
≥3.0 W/m·K
Mixed viscosity
8,000-15,000 cps
Working time
At least 30 min

Potential potting locations

Supply magnetics
Local potting around a transformer or filter must retain the existing heat path to the housing and electrical clearances.
Distribution interfaces
These electronics feed several tiles. High-current terminal connections and removable harnesses stay outside the fill.
Auxiliary converters
These supplies power receiving and control circuits. Data connectors and diagnostic points remain accessible.

Application testing

Compatibility, cure and assembly performance need testing with the production materials and process.

Brightness and heat
Changing display patterns should be run at the specified ambient and sunlight conditions, with comparison of module temperatures and regulated outputs.
Cabinet exposure
Condensation, temperature-cycle and enclosure-protection tests need the actual seals and drains. A filled supply does not establish the cabinet’s ingress rating.
Signals and servicing
Tile power, receiving-card communication and module replacement need checks after cure and environmental tests. Connections and protection devices also need inspection after servicing.
More in appliances & tools

Buy from DBSilco

Get a quote for your FD503 order.

Email the grade, quantity and delivery destination. We’ll confirm pricing, A/B pack sizes and delivery terms.

Grade not selected? Include your application and required properties.

Sales email

sales@dbsilco.com