Skip to content

FD503 material applications

LED lighting

LED drivers can use FD503 in their electronics compartment, outside the light path.

Industrial LED luminaires above a bright warehouse aisle
Illustrative image: potential FD503 application.

Material supply

FD503 grades

Full grade comparison

FD503-TG60E

TG60E suits a slim driver housing where narrow passages make complete filling the first concern.

Thermal conductivity
≥0.6 W/m·K
Mixed viscosity
1,500-2,500 cps
Working time
30-50 min

FD503-TG101

TG101 fits drivers with moderate heat-transfer needs where filling beneath taller components matters most.

Thermal conductivity
≥0.9 W/m·K
Mixed viscosity
2,500 ± 1,000 cps
Working time
At least 30 min

FD503-TG20

TG20 is an option for a driver with a short heat path to the metal case. Shore 00 and Shore A have different specifications.

Thermal conductivity · Shore 00
2.0 ± 0.1 W/m·K
Mixed viscosity
3,000-5,000 cps
Working time
At least 40 min

TG20 has separate Shore 00 and Shore A data sheets with different values. Confirm the version with DBSilco before ordering.

Potential potting locations

Outdoor luminaire drivers
Driver boards sit inside metal housings. Cable entries and enclosure seals need separate tests.
Architectural lighting supplies
These compact enclosed converters power linear fixtures, downlights and decorative lighting.
Industrial light drivers
High-bay and work-light drivers can be limited by the temperature inside their fixture housings.

Application testing

Compatibility, cure and assembly performance need testing with the production materials and process.

Output and dimming
The filled driver needs startup, full-output and dimming checks at the specified supply and ambient conditions.
Steady operating temperature
The assembled fixture should run until temperatures stabilize. Driver hot spots and case temperatures can then be compared before and after filling.
Humidity and insulation
The fixture’s specified environmental tests should be followed by insulation checks, especially at cable exits and contact between the fill and housing.
More in buildings

Buy from DBSilco

Get a quote for your FD503 order.

Email the grade, quantity and delivery destination. We’ll confirm pricing, A/B pack sizes and delivery terms.

Grade not selected? Include your application and required properties.

Sales email

sales@dbsilco.com