Skip to content

FD503 material applications

EV thermal-management pumps

An EV coolant pump’s controller can be potted inside the dry compartment, with fluid passages and moving parts left clear.

Electric coolant pump mounted in a vehicle cooling circuit with two hoses and a sealed wiring connector.
Illustrative image: potential FD503 application.

Material supply

FD503 grades

Full grade comparison

FD503-TG60E

TG60E’s low viscosity helps it flow around ribs and lead exits in a shallow controller compartment.

Thermal conductivity
≥0.6 W/m·K
Mixed viscosity
1,500-2,500 cps
Working time
30-50 min

FD503-TG101

TG101 is an option when the dry compartment contacts a housing section that is cooler than the driver board.

Thermal conductivity
≥0.9 W/m·K
Mixed viscosity
2,500 ± 1,000 cps
Working time
At least 30 min

FD503-TG20

TG20 is an option for hotter dry compartments with enough filling clearance. Shore 00 and Shore A have different specifications.

Thermal conductivity · Shore 00
2.0 ± 0.1 W/m·K
Mixed viscosity
3,000-5,000 cps
Working time
At least 40 min

TG20 has separate Shore 00 and Shore A data sheets with different values. Confirm the version with DBSilco before ordering.

Potential potting locations

Three-phase driver board
The switching devices and driver circuits sit behind the motor, with a heat path to the controller housing.
Control-power supply
Regulators in the dry compartment power speed control and communication circuits.
Feedback interface
These circuits process current, voltage and temperature readings. Sensors retain their specified contact points and calibration access.

Application testing

Compatibility, cure and assembly performance need testing with the production materials and process.

Speed and coolant temperatures
The thermal test should cover pump speeds, supply voltages and the specified coolant-temperature range, including extended hot operation.
Control repeatability
Speed regulation, startup, diagnostics and feedback readings should be compared after filling and thermal cycling.
Finished-pump durability
Vibration and moisture tests should be followed by dry-compartment inspection and the finished pump’s electrical and hydraulic tests.
More in mobility

Buy from DBSilco

Get a quote for your FD503 order.

Email the grade, quantity and delivery destination. We’ll confirm pricing, A/B pack sizes and delivery terms.

Grade not selected? Include your application and required properties.

Sales email

sales@dbsilco.com