Skip to content

FD503 material applications

Automotive DC/DC converters

Local potting can surround a vehicle converter’s magnetics while high-current terminals and cooling connections stay accessible.

Finned automotive DC/DC converter with output studs and sealed connectors on a workbench.
Illustrative image: potential FD503 application.

Material supply

FD503 grades

Full grade comparison

FD503-TG20

TG20 is a medium-viscosity option around the transformer. Shore 00 and Shore A have different specifications.

Thermal conductivity · Shore 00
2.0 ± 0.1 W/m·K
Mixed viscosity
3,000-5,000 cps
Working time
At least 40 min

FD503-TG30

TG30 has thermal conductivity of at least 3.0 W/m·K. The transformer compartment needs enough clearance for its higher-viscosity mix.

Thermal conductivity
≥3.0 W/m·K
Mixed viscosity
8,000-15,000 cps
Working time
At least 30 min

FD503-TG60E

TG60E’s low viscosity helps fill small housekeeping-supply passages where reaching hidden gaps matters more than the listed conductivity.

Thermal conductivity
≥0.6 W/m·K
Mixed viscosity
1,500-2,500 cps
Working time
30-50 min

TG20 has separate Shore 00 and Shore A data sheets with different values. Confirm the version with DBSilco before ordering.

Potential potting locations

Isolation transformer pocket
The space around the transformer and winding exits can hold a local fill between the magnetic component and metal wall.
Output inductor
This high-current component sits beside the rectifier circuit. Busbar joints and terminal connections need clear access.
Housekeeping supply
This enclosed supply powers the controller and gate drivers. Replaceable harness connections stay outside its fill.

Application testing

Compatibility, cure and assembly performance need testing with the production materials and process.

Accessory load sequence
Temperature measurements should cover the transformer and output inductor during continuous demand, startup peaks and the specified cooling limits.
Insulation integrity
The converter needs its specified isolation tests after temperature cycling and humidity exposure, with inspection for voids and separation from the housing.
Connection durability
Vibration tests should be followed by checks of winding exits, high-current joints and access for terminal assembly.
More in mobility

Buy from DBSilco

Get a quote for your FD503 order.

Email the grade, quantity and delivery destination. We’ll confirm pricing, A/B pack sizes and delivery terms.

Grade not selected? Include your application and required properties.

Sales email

sales@dbsilco.com