Skip to content

FD503 material applications

Heat-pump inverter controls

Heat pumps can use FD503 around auxiliary supplies and magnetics in the dry electronics compartment.

Outdoor air-to-water heat-pump unit on raised supports beside a brick house.
Illustrative image: potential FD503 application.

Material supply

FD503 grades

Full grade comparison

FD503-TG101

TG101 fits the compact auxiliary supply, where losses are moderate and the material can contact the housing.

Thermal conductivity
≥0.9 W/m·K
Mixed viscosity
2,500 ± 1,000 cps
Working time
At least 30 min

FD503-TG20

TG20 is an option around hot magnetics with a short heat path to the housing. Shore 00 and Shore A have different specifications.

Thermal conductivity · Shore 00
2.0 ± 0.1 W/m·K
Mixed viscosity
3,000-5,000 cps
Working time
At least 40 min

TG20 has separate Shore 00 and Shore A data sheets with different values. Confirm the version with DBSilco before ordering.

Potential potting locations

Outdoor auxiliary supply
This AC/DC supply powers the controller, relays and sensors inside a separate electronics compartment.
Input-circuit magnetics
The power-factor-correction circuit uses a choke or transformer near the housing. Exposed terminals and the main semiconductor interface stay clear of fill.
Gate-driver supply
This converter powers the compressor inverter’s gate circuits. Insulation slots and connector spaces remain open.

Application testing

Compatibility, cure and assembly performance need testing with the production materials and process.

Operating temperatures
Supply and magnetic temperatures need recording during heating, defrost and restart across the heat pump’s specified ambient-temperature range.
Temperature and condensation
Required exposure tests should be followed by inspection for voids, insulation changes and separation from the housing.
Function and servicing
Startup, sensor readings and supply regulation need rechecking after filling. Connectors, drains and replaceable boards must still work and fit correctly.
More in buildings

Buy from DBSilco

Get a quote for your FD503 order.

Email the grade, quantity and delivery destination. We’ll confirm pricing, A/B pack sizes and delivery terms.

Grade not selected? Include your application and required properties.

Sales email

sales@dbsilco.com