Skip to content

FD503 material applications

Robot servo drives

FD503 grades are options for a robot servo drive’s small supply circuits. Grade choice depends on the motion cycle and module location.

Articulated robot arm with joint housings and cables beside an industrial assembly fixture.
Illustrative image: potential FD503 application.

Material supply

FD503 grades

Full grade comparison

FD503-TG60E

TG60E has low viscosity, so it can flow beneath a miniature supply transformer and let trapped air escape.

Thermal conductivity
≥0.6 W/m·K
Mixed viscosity
1,500-2,500 cps
Working time
30-50 min

FD503-TG101

TG101 is an option for driver-support circuits that need moderate heat transfer through open filling passages.

Thermal conductivity
≥0.9 W/m·K
Mixed viscosity
2,500 ± 1,000 cps
Working time
At least 30 min

FD503-TG20

TG20 is a medium-viscosity option for a warmer converter compartment. Shore 00 and Shore A have different hardness and other properties.

Thermal conductivity · Shore 00
2.0 ± 0.1 W/m·K
Mixed viscosity
3,000-5,000 cps
Working time
At least 40 min

TG20 has separate Shore 00 and Shore A data sheets with different values. Confirm the version with DBSilco before ordering.

Potential potting locations

Gate-driver supply
Small isolation transformers and supply components power the driver beside the motor connection.
Enclosed DC converter
Selected converter components can be locally potted with a heat path to the drive housing. Power connections remain accessible.
Encoder interface supply
This enclosed circuit regulates power for the feedback interface. Encoder contacts and calibration features stay clear of fill.

Application testing

Compatibility, cure and assembly performance need testing with the production materials and process.

Robot-cycle temperatures
Supply and housing measurements should cover acceleration, holding and regenerative braking at the specified payload and ambient temperature.
Position feedback
Encoder-interface accuracy and communication should be compared before filling and after temperature cycling across the operating range.
Module endurance
Vibration or joint-motion tests should be followed by inspection of lead exits and housing contact, then insulation and drive-function checks.
More in automation

Buy from DBSilco

Get a quote for your FD503 order.

Email the grade, quantity and delivery destination. We’ll confirm pricing, A/B pack sizes and delivery terms.

Grade not selected? Include your application and required properties.

Sales email

sales@dbsilco.com