Skip to content

FD503 material applications

Mobile-robot controllers

FD503 can fill a mobile robot’s enclosed drive compartment within its weight limit. Docking and service connections stay accessible.

Autonomous mobile robot supporting a tote rack in a warehouse aisle.
Illustrative image: potential FD503 application.

Material supply

FD503 grades

Full grade comparison

FD503-TG60E

TG60E suits the auxiliary converter when narrow passages make complete filling the main concern.

Thermal conductivity
≥0.6 W/m·K
Mixed viscosity
1,500-2,500 cps
Working time
30-50 min

FD503-TG101

TG101 is an option for wheel-drive support circuits with a short heat path to the housing and moderate thermal demand.

Thermal conductivity
≥0.9 W/m·K
Mixed viscosity
2,500 ± 1,000 cps
Working time
At least 30 min

FD503-TG20

TG20 is a medium-viscosity option for a warmer drive compartment within the robot’s fill-weight allowance. Shore 00 and Shore A have different specifications.

Thermal conductivity · Shore 00
2.0 ± 0.1 W/m·K
Mixed viscosity
3,000-5,000 cps
Working time
At least 40 min

TG20 has separate Shore 00 and Shore A data sheets with different values. Confirm the version with DBSilco before ordering.

Potential potting locations

Wheel-drive controller
The enclosed traction module beside the motor contains driver circuits and a local supply.
Auxiliary DC/DC supply
This converter powers control circuits and sensors. Ventilation and removable harness connections stay clear.
Docking power interface
Regulation and monitoring circuits sit behind the charging connection. Exposed docking contacts remain outside the fill.

Application testing

Compatibility, cure and assembly performance need testing with the production materials and process.

Loaded route and docking
Temperature and supply measurements should cover loaded starts, turns, braking and the specified docking cycle.
Floor vibration
Travel over representative floor joints and vibration testing should be followed by lead-exit, board-support, continuity and function checks.
Connections after replacement
Charging contacts, sensor alignment and communications need checking after environmental exposure and a trial module replacement.
More in automation

Buy from DBSilco

Get a quote for your FD503 order.

Email the grade, quantity and delivery destination. We’ll confirm pricing, A/B pack sizes and delivery terms.

Grade not selected? Include your application and required properties.

Sales email

sales@dbsilco.com