Skip to content

FD503 material applications

Pump pressure controllers

Local potting can fill a pump pressure controller’s dry board compartment, separate from the diaphragm and water passages.

Round pump pressure controller connected above a stainless water booster pump in a utility room
Illustrative image: potential FD503 application.

Material supply

FD503 grades

Full grade comparison

FD503-TG60E

TG60E suits the small dry-side compartment, where thin gaps around supply components need a controlled, limited fill.

Thermal conductivity
≥0.6 W/m·K
Mixed viscosity
1,500-2,500 cps
Working time
30-50 min

FD503-TG101

TG101 can cover the pump-switch drivers if the lid leaves enough space and a path for heat to escape.

Thermal conductivity
≥0.9 W/m·K
Mixed viscosity
2,500 ± 1,000 cps
Working time
At least 30 min

Potential potting locations

Pressure-reading board
These circuits power the sensor and process its reading on the dry side, away from the diaphragm and pressure port.
Pump-switch drivers
Relay-coil drivers or semiconductor circuits command the pump. Contacts and moving relay parts remain outside the fill.
Supply and processor
The supply, processor and indicator circuits detect demand, repeated cycling and dry-running conditions inside the lid.

Application testing

Compatibility, cure and assembly performance need testing with the production materials and process.

Pressure and flow response
Calibrated pressure and flow tests should compare the start/stop pressure gap, repeatability and zero-pressure reading before and after environmental cycling.
Demand and faults
The planned pump load and settings should guide repeated-start, low-demand and loss-of-water tests.
Dry-compartment condition
Board temperatures, insulation and voids need checking. Enclosure seals and cable entries must still protect the electronics compartment.
More in field equipment

Buy from DBSilco

Get a quote for your FD503 order.

Email the grade, quantity and delivery destination. We’ll confirm pricing, A/B pack sizes and delivery terms.

Grade not selected? Include your application and required properties.

Sales email

sales@dbsilco.com