Skip to content

FD503 material applications

Electric-motorcycle controllers

Electric motorcycles can use FD503 in selected controller compartments with a heat path to the housing.

Electric motorcycle drivetrain and finned controller housing in a bright service bay.
Illustrative image: potential FD503 application.

Material supply

FD503 grades

Full grade comparison

FD503-TG101

TG101 is an option for driver-support electronics with a short heat path to the enclosure and moderate conductivity needs.

Thermal conductivity
≥0.9 W/m·K
Mixed viscosity
2,500 ± 1,000 cps
Working time
At least 30 min

FD503-TG20

TG20 is a medium-viscosity option for a warmer compartment. Shore 00 and Shore A have different specifications.

Thermal conductivity · Shore 00
2.0 ± 0.1 W/m·K
Mixed viscosity
3,000-5,000 cps
Working time
At least 40 min

FD503-TG30

TG30 has thermal conductivity of at least 3.0 W/m·K. The controller needs open passages for filling and must accommodate the added material weight.

Thermal conductivity
≥3.0 W/m·K
Mixed viscosity
8,000-15,000 cps
Working time
At least 30 min

TG20 has separate Shore 00 and Shore A data sheets with different values. Confirm the version with DBSilco before ordering.

Potential potting locations

Power-conversion compartment
Selected components beside the switching stage can be locally potted. Busbar joints and the specified heatsink interface remain clear.
Gate-driver supply
This compartment contains supply electronics and miniature magnetics between the control board and main power section.
Throttle and motor-feedback interface
Signal-conditioning electronics sit in an enclosed compartment. Connector contacts and diagnostic points remain accessible.

Application testing

Compatibility, cure and assembly performance need testing with the production materials and process.

Road-duty temperatures
Temperature measurements should cover acceleration bursts, climbing and low-speed operation at the specified ambient conditions.
Throttle and motor feedback
Temperature cycling should be followed by signal, calibration and connector-continuity checks for the throttle and motor-position channels.
Vibration and spray
The assembled enclosure needs the specified vibration and spray tests, followed by insulation and functional checks.
More in mobility

Buy from DBSilco

Get a quote for your FD503 order.

Email the grade, quantity and delivery destination. We’ll confirm pricing, A/B pack sizes and delivery terms.

Grade not selected? Include your application and required properties.

Sales email

sales@dbsilco.com