Skip to content

FD503 material applications

Drone electronic speed controllers

FD503 is an option for a small enclosed ESC compartment with a heat path to the housing and room for the added fill weight.

Slim motor controller mounted along a carbon-fibre drone arm
Illustrative image: potential FD503 application.

Material supply

FD503 grades

Full grade comparison

FD503-TG101

Low viscosity helps TG101 flow around components in a small power-board compartment and carry heat to the housing.

Thermal conductivity
≥0.9 W/m·K
Mixed viscosity
2,500 ± 1,000 cps
Working time
At least 30 min

FD503-TG20

TG20 is an option for a hotter section with open filling gaps and an acceptable fill weight. Shore 00 and Shore A have different specifications.

Thermal conductivity · Shore 00
2.0 ± 0.1 W/m·K
Mixed viscosity
3,000-5,000 cps
Working time
At least 40 min

TG20 has separate Shore 00 and Shore A data sheets with different values. Confirm the version with DBSilco before ordering.

Potential potting locations

Arm-mounted power boards
The slim board carries power switches and motor leads along the arm, leaving little room for material.
Enclosed motor controllers
A separate housing can hold a small fill around the electronics, provided heat can reach its metal cooling surface.
Gate-drive boards
These boards control the power switches. Test pads and removable signal plugs still need access.

Application testing

Compatibility, cure and assembly performance need testing with the production materials and process.

Temperatures
Load testing should compare power-switch and housing temperatures, including operation with restricted cooling.
Controller operation
Electrical checks cover current sensing, motor commands and insulation after filling and temperature cycling, using the controller maker’s procedure.
Aircraft fit
The completed installation needs checks for wire fatigue, mounting loads and added mass. Any controller or aircraft approval needs its own test evidence.
More in drones

Buy from DBSilco

Get a quote for your FD503 order.

Email the grade, quantity and delivery destination. We’ll confirm pricing, A/B pack sizes and delivery terms.

Grade not selected? Include your application and required properties.

Sales email

sales@dbsilco.com